Project Description

1310nm Polarization Beam Combiner/Splitter

The 1310nm Polarization Beam Combiner/Splitter can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beam splitter to split light from an input fiber into two output fibers of orthogonal polarization states.

DK Photonics offers a large selection of PBS/C. These devices can handle powers rang from 300mW to 10W or other on request, and have center operating wavelengths ranging from 850 nm to 1650nm.

If you do not see a standard Polarization Beam Combiner/Splitter that meets your needs, we welcome the opportunity to review your desired specification and quote a custom Polarization Beam Combiner/Splitter. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.

Features Applications
  • Low Insertion Loss
  • High Extinction Ratio
  • Compact In-Line Package
  • High Stability and Reliability
  • Polarization MUX/Demux
  • High power EDFA
  • Optic sensor system
  • Optic transmit system
Performance Specifications

Parameter Unit Value
Grade P A
Operating wavelength nm 1310
Operating bandwidth nm ±40 ±40
Typical insertion loss dB 0.40 0.50
Max. insertion loss dB 0.60 0.70
Min. Extinction Ratio dB 22 20
Return loss dB >50
Directivity dB >50
Max. Power Handling W 0.5, 1, 2, 3, 5, 10
Tensile Load N < 5
Fiber Type Port 1&Port2 PM1300 Panda Fiber
Port 3  SMF-28e, or PM1300 Panda Fiber
Operating temperature -5 ~ +70
Storing temperature -40 ~ +85
Package dimension mm Ø5.5 x 35 or customer specified
  1. above specifications are for device without connector. All parameters are tested at room temperature.
  2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmits through the connector less than 2W.
  3. For >10W high power applications, we will use heat sink package, contact DK Photonics for details.
  4. Since the light is bidirectionally reversible, PBC can also be used as PBS.

Package Dimension

*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.

Order information   P/N: PBC/PBS-①-②-③-④-⑤-⑥-⑦

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.

Grade Operating Wavelength Power Handling(Total) Fiber type (Port3) Pigtails Diameter Fiber Length Connector
P:P

A:A

13:1310nm

14:1480nm

15:1550nm

XX: Others

L:<0.5W

1:1W

2:2W

5:5W

10:10W

1:SMF-28e fiber

2:PM fiber, slow axis 45° to port 1

3:PM fiber, slow axis aligned to port 1

25:250μm

90:900μm

XX: Others

08:0.8m

10:1.0m

XX: Others

00:None

FP: FC/PC

FA: FC/APC

LP: LC/PC

LA: LC/APC

XX: Others

Part Number Example: PBC-P-13-L-1-25-10-00

Description: 1310nm Polarization Beam Combiner, 0.5W power, P grade, SMF-28e fiber at port 3, with bare fiber, 1.0m fiber length, and no connectors at all ports.

Ordering Information for Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Download

Request a quote

Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.