Project Description

TGG Based 1030nmOptical Isolator

The TGG Based 1030nmOptical Isolator Optical Isolator is characterized with low insertion loss, high isolation, high return loss, excellent environmental stability and reliability. It has been widely used in lasers, transmitters and other fiber optics communication equipment to suppress back reflection and back scattering.

DK Photonics offers a large selection of polarization insensitive or polarization maintaining fiber-in to fiber-out isolators. These devices can handle powers rang from 300mW to 150W or other on request, and have center operating wavelengths ranging from 780nm to 1650nm.

If you do not see a standard isolator that meets your needs, we welcome the opportunity to review your desired specification and quote a custom isolator. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.

Features Applications
·        High isolation

·        Low insertion loss

·        Cost Effective

·        Excellent environmental stability and reliability

·        Fiber Optic Amplifiers

·        Fiber Optic Laser

·        Test and Measurement

·        Instrumentation

Performance Specifications

Parameters Unit Values
Central Wavelength nm 1030
Operating Wavelength Range nm ±15
Typ. Peak Isolation dB 32
Min. Isolation in Band (at 25℃) dB 26
Typ. Insertion Loss dB 0.6
Max. Insertion Loss (at 25℃) dB 1.2
Max. PDL(for SM fiber) dB 0.15
Min. Extinction Ratio(for PM fiber) dB 18(Type B), 20(Type F)
Min. Return Loss dB 45
Maximum Power Handling (continuous wave) W 0.5,1, 2, 5,10
Max. Peak Power for ns Pulse kW 1, 5,10
Max. Tensile Load N 5
Fiber Type HI1060, Nufern PM980-XP fiber, 10/125 SC,PM1060L or other
Operating Temperature °C 0 ~ + 70
Storage Temperature °C -40 ~ +85
  1. Above specification are for device without connector, and may change without notice.
  2. IL is 0.3 dB higher and RL is 5 dB lower, ER is 2dB lower (PM type) for each connector added.
  3. The pass optical power is 2 W only for connector added.
  4. Type B: Both axis working, Type F: Fast axis blocked, the default is Type B if without request.(Only for PM type).
  5. If it is a pulse application, be sure to inform the pulse energy and peak power.

Package Dimension

*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.

Order information

P/N: PMISO-B/F-①-②-③-④-⑤-⑥-⑦(B: Both axis working , F:Fast axis blocked)

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail. For high power applications, we recommend direct splicing without connectors.

wavelength Optical Power Power Type Fiber Type Pigtails Diameter Fiber Length Connector Type
85:850nm

98:980nm

30:1030nm

64:1064nm

80:1080nm

XX: Other

L:<0.5W 1:1W 3:3W 5:5W 10:10W P: Pulsed

C: Continuous Wave

XX/XX/XX/XX(core/clad/core NA/clad NA) 25:250μm bare fiber

90:900μm Loose Fiber

XX: Others

10:1.0m

XX: Other

00: None

FP: FC/PC

FA: FC/APC

XX: Others

Part Number Example: PMISO-F-30-L-C-PM1060L-90-10-FA

Description: TGG Based 1030nm Optical Isolator, fast axis blocked, 0.5W power handling, continuous wave power, PM1060L fiber, with 0.9mm OD loose tube, 1.0m length fiber pigtails, FC/APC connectors at all ports.

Ordering Information for Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Download

Request a quote

Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.