1064/1550nm Polarization Maintaining Fused WDM
DK Photonics uses unique fusing technique and polarization maintaining fiber to build the 1064/1550nm polarization maintaining fused WDM. It features low excess loss, small size and high polarization extinction ratio. PM fused WDM is widely used for fiber laser, optical sensors and optical gyro.
This product can also be used to multiplex other wavelengths. Including 980/1030 nm (pulsed laser applications) and 1064/1550 nm (Erbium-Ytterbium pumping). Low power (300mW, 500mW) and high power (20W) handling are available. They are ideal for polarization maintaining fiber amplifiers, fiber lasers, and high-speed communication system and instrumentation applications.
| Features | Applications |
| · Low Insertion Loss
· High Isolation · High Extinction Ratio · High power handling · High Stability and Reliability |
· Fiber laser
· Fiber amplifier · Fiber Sensor · Communications |
| Parameter | Unit | Specifications | |
| Operating Wavelength | nm | 1064/1550 | |
| Operating bandwidth | nm | ±10/±15 | |
| Max. Insertion Loss | Pump Port | dB | 0.50 |
| Signal Port | dB | 0.70 | |
| Min. Isolation | dB | 20 | |
| Min. Extinction Ratio | dB | 18 | |
| Min. Directivity | dB | 55 | |
| Max. Power Handling | W | 2, 5,10 | |
| Operating Temperature | °C | -5 ~ +70 | |
| Storage Temperature | °C | -50 ~ +85 | |
| Fiber Type | – | PM panda fiber | |
| Fiber Pigtail Length | m | 1m or custom length | |
| Port Configuration | – | 1×2 | |
| Package Dimension | mm | Ф3.0×60(bare fiber), or Ф3.0×70(900μm loose tube) | |
- Above specifications are for device without connector, and the PM WDM device is both axis working, no axis can be blocked; default test extinction ratio is on the slow axis. All parameters are tested at room temperature.
- For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. Power transmits through the connector less than 2W. The default connector key is aligned to slow axis.
- For >10W high power applications, we will use heat sink package, contact DK Photonics for details.
- If there is pulse application, please be sure to inform us of pulse energy and peak power.
Package Information:
Order information P/N: PMFBTWDM-①-②-③-④-⑤-⑥
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
| ① | ② | ③ | ④ | ⑤ | ⑥ |
| Port | Operating Wavelength | Power Handling | Pigtails Diameter | Fiber Length | Connector |
| 102:1×2
202:2×2 |
95:980/1550nm
65:1064/1550nm 93:980/1030nm 96:980/1064nm 35:1310/1550nm XX: Others |
L:<0.5W
1:1W 3:3W 5:5W 10:10W |
25:250μm bare fiber
90:900μm Loose tube XX: Others |
08:0.8m
10:1.0m XX: Others |
00:None
FP: FC/PC FA: FC/APC SA: SC/APC LA: LC/APC XX: Others |
Part Number Example: PMFBTWDM-102-65-1-90-10-FA
Description: 1064/1550nm 1×2 Polarization Maintaining Fused WDM – 1W, 1.0m PM Panda Fiber with 0.9mm OD loose tube, and FC/APC connectors at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
