Project Description

PM Pump Laser Protector

The Pump Laser Protector, also called Pump Protection Filter, is a passive component which allows maximum transmission from a discrete fibre-coupled pump laser diode and blocks par asitic signals around the centre wavelength of the laser from being reflected back into the laser. Depending on the fiber type of laser diode, we have SM Pump Laser Protector, PM Pump Laser Protector, MM Pump Laser Protector. They can work for 1.0μm fiber laser and 1.5μm fiber laser.

If you do not see a standard Pump Laser Protector that meets your needs, we welcome the opportunity to review your desired specification and quote a custom isolator. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.

Features Applications
·         Low Insertion Loss

·         High Power Handling

·         High Isolation

·         Low Cost

·         High Reliability

·         Excellent Temperature Stability

·         Fiber Amplifiers

·         Fiber lasers

·         Test and Measurement

·         Instrumentation

Performance Specifications

Parameters Unit Values
Pump Laser Center Wavelength nm  915  or  975
Operating Wavelength Range nm ± 15
Typ. Pump Insertion Loss dB 0.4
Max. Pump Insertion Loss(-5~70℃) dB 0.6
Min. PER dB 18
Operating Signal Wavelength Range mm 1020~1120(1.0μm) or 1530~1570(1.5μm)
Min. Backward Signal Isolation dB 30
Max. Optical Power CW 0.5, 7, 10, or Specify
Min. Return Loss dB 50
Fiber Type PM980 Panda fiber or Specify
Operation Temperature -5 ~ +65
Storage Temperature Range -40 ~ +85
  1. Above specification are for device without connector, and may change without notice.
  2. IL is 0.3 dB higher and RL is 5 dB lower, ER is 2dB lower (PM type) for each connector added.
  3. The pass optical power is 2 W only for connector added.

Package Dimension

In-line Polarizer

Dimension for <10W

Dimension for <30W

*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.

Order information P/N: PMPLP-①-②-③-④-⑤-⑥-⑦

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail. For high power applications, we recommend direct splicing without connectors.

Pump Laser Wavelength Optical Power Backward Signal Wavelength Fiber Type Fiber Jacket on In & Out Fiber Length Connector Type on In&Out
915:915nm

975:975nm

XX: Other

05:5W

10:10W

20:20W

25:25W

XX: Other

10:1064nm

15:1550nm

XX/XX/XX(core/clad/ NA) 25:250μm Bare Fiber

90:900μm Loose Tube

XX: Others

10:1.0m

XX: Other

00:None

XX: Others

Part Number Example: PMPLP-975-10-10-PM980-25-08-00

Description: 975nm PM Pump Laser Protector, – 10W, backward signal wavelength 1064nm, PM980 fiber, with bare fiber & 0.8m length, no connector.

Ordering Information for Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Download

Request a quote

Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.