Project Description
2.0μm High Power Polarization Maintaining Optical Isolator
The 2000nm Polarization Maintaining Isolator is a two port micro-optic device built with PM panda fiber. The PM isolator features low insertion loss, high isolation, high extinction ratio and high reliability and stability. The device guides optical light in one direction and eliminates back reflection and back scattering in the reverse direction. The device can be built with bare fiber, or 900um jacket cable. The PM Panda Fiber Isolator is widely used in amplifier systems, fiber optic systems and fiber lasers.
If you do not see a standard isolator that meets your needs, we welcome the opportunity to review your desired specification and quote a custom isolator. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.DK Photonics can respond to custom requirements with short lead times.
| Features | Applications |
| · Low Insertion Loss
· High Extinction Ratio · High Return Loss · High Isolation · High stability & Reliability |
· Testing Instrumentations
· Transmitters · Fiber Laser · EDFA · Raman Amplifiers |
Performance Specifications
| Parameter | Unit | Values | |
| Stage | – | Single | Dual |
| Center Wavelength | nm | 1940, 2000,2050,2100 | |
| Min. Isolation at 23℃ , λc ± 30 nm | dB | 20 | 35 |
| Max. Insertion Loss at 23℃, λc ± 20 nm | dB | 1.2 | 1.5 |
| Max. Extinction Ratio | dB | 20 | 18 |
| Min. Return Loss | dB | 50/50 | |
| Max. Optical Power(CW) | W | 0.3, 1, 2, 5, 10 | |
| Max. Tensile Load | N | 5 | |
| Fiber Type | – | PM1550 or Nufern PM1950 Fiber | |
| Operating Temperature | ℃ | -5~+70 | |
| Storage Temperature | ℃ | -40~+85 | |
| Package Dimension | mm | Ф5.5× L35(<5W), 65x12x9(>5W) | |
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmit through the connector less than 2W.
*For >5W high power applications, we will use heat sink package, contact DK Photonics for details.
*For high-power applications, IL and ISO will be slightly worse due to the heat absorbed by the Faraday plate and the temperature rise. But they are all within a reasonable range. For more information, please contact DKP.
Package Dimension
*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information P/N: PMISO-①-②-③-④-⑤-⑥-⑦-⑧
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
| ① | ② | ③ | ④ | ⑤ | ⑥ | ⑦ | ⑧ | |
| Type | wavelength | Power Handling | Axis Alignment | Fiber type | Pigtails Diameter | Fiber Length | Connector | |
| S:Single stage
D:Dual stage |
1940:1940nm
2000:2000nm 2050:2050nm XX: Others |
L:<0.3W
1:1W 2:2W 5:5W 10:10W |
B:Both axis working
F: Fast axis blocking |
P15: PM1550
P19: PM1950 |
25:250μm bare fiber
90:900μm Loose Fiber XX: Others |
08:0.8m
10:1.0m XX: Others |
00:None
FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC XX: Others |
|
Part Number Example: PMISO-S-2000-L-F-P19-90-10-FA
Description: 2000nm Polarization Maintaining Dual stage Isolator – 300mW, Fast axis blocking, PM1950 fiber, 1.0m fiber length with 0.9mm OD loose tube, and FC/APC connectors at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
