High Power Fiber Collimator-1000W
High Power Fiber Collimator can be used for high power fiber laser and fiber amplifier termination. These devices can be used to reduce the power density at output fiber facet and with a parallel optical output.
500W 1000W(water cool)
| Features |
| · High Power Application
· Low Signal Loss · Low Beam Distortion · Fiber can be Customized · High Extinction Ratio (for PM Fiber) · Mode Stripper is Used · Stable and Reliable |
| Applications |
| · High Power Fiber Lasers
· High Power Fiber Amplifiers · Industrial, Medical & Research |
Performance Specifications
| Parameters | Unit | Values | |
| Center Wavelength | nm | 1030,1064,1080 | |
| Operating Wavelength Range) | nm | ±20 | |
| Min. Transmission | % | 93 | |
| Beam Diameter | mm | 5~7 | |
| Min. Ellipticity | % | 95 | |
| Far Filed Divergence(1064nm) | mrad | 0.5 | 0.8 |
| Min. PER( for PM fiber) | dB | 16 | |
| Min. Return Loss | dB | 35 | |
| Max. Optical Power(CW) | W | 100 200 500 | 500 1000 |
| Fiber Type | – | LMA 25/250 DCF fiber,20/400 DCF Fiber or other | |
| Tensile Load | KG | 2 | |
| Armored Length(A) | m | 2, 5, 10 | |
| Fiber Length(B) | m | 2 | |
| Operating Temperature | ℃ | -5 to +65 | |
| Storage Temperature | ℃ | -40 to +85 | |
| Package Dimensions | mm | Dia14.0X145.0(air cool) | Dia17.0X218.5(water cool) |
- Above specification are for device without connector, and may change without notice.
- Both single cladding fiber (SCF) and double cladding fiber (DCF) are available.
- These devices must be mounted on heat sink with good heat conduction.
Package Dimension
*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information P/N: HPC (PMHPC)-①-②-③-④-⑤-⑥
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. For high power applications, we recommend direct splicing without connectors.
| ① | ② | ③ | ④ | ⑤ | ⑥ |
| wavelength | Optical Power | Beam Diameter | Fiber Type | Fiber Jacket on Input & Length(A) | Fiber Length(B) |
| 30:1030nm
64:1064nm 80:1080nm XX: Other |
100:100W
300:300W 500:500W 1000:1000W XX: Other |
05:5.0±1.0mm
06:6.0±1.0mm XX: Other |
XX/XX/XX/XX(core/clad/core NA/clad NA) | 0802:8mm Armored Cable&2.0m Length
1310:13mm Armored Cable&10.0m Length XXX: Others |
B10:1.0m
B20:2.0m XX: Other |
Part Number Example: HPC-64-500-08-10/125/008/046-A20-10
Description: 1064nm High Power Fiber Collimator,500W Power, 8.0±1mm beam diameter, 20/400um, NA0.06/0.46 fiber, with 6mm Armored Cable & 2.0m Length, and 1.0m length bare fiber after the armored cable.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
